Installation
All LUMR LIGHTING wheel lights and rock lights are plug-and-play, making installation simple when installed correctly.
Wheel Lights
- Mount the wheel lights securely using the included mounting hardware.
- Mount the module in a secure location on the vehicle.
- Connect the module to the vehicle’s battery.
- Run the included wire extensions from the module to each wheel light.
- Connect the wire extensions to the wheel lights.
- Secure and protect all wiring before use.
Important: Lifetime Warranty
To keep your limited lifetime warranty active, wheel lights must be mounted and wired correctly.
We strongly recommend using bolts with nuts and Loctite on the mounting hardware to help prevent the lights from coming loose or falling off.
The lifetime warranty does not cover damage caused by improperly mounted, improperly wired, modified, or incorrectly installed lights.
Rock Lights
Our rock lights are also plug-and-play.
- Mount the rock lights securely underneath the vehicle.
- Mount the module in a secure location.
- Connect the module to the vehicle’s battery.
- Run the included wire extensions from the module to the rock lights.
- Connect the wire extensions to the rock lights.
- Secure and protect all wiring before use.
Wiring & Protection
For a cleaner and more protected installation, we recommend running your wires through protective wire tubing.
The tubing can then be zip-tied underneath the truck or directly to the frame to keep the wiring organized, protected, and out of the way.
Keep all wiring away from:
- Exhaust components
- Moving suspension parts
- Driveshafts
- Tires
- Sharp edges
- Excessive heat
Before You Install
Always test your lights before permanently securing your wiring.
Make sure:
- All connections are secure.
- The module is connected correctly to the battery.
- All wire extensions are connected properly.
- Lights are mounted securely.
- Wiring is protected and secured.
Proper installation is required for warranty coverage.